One of the quiet truths about Custom Baseboard is that the factory selection decision is more important than the product selection decision. Two ostensibly identical SKUs from different factories perform very differently on site.
An order for Custom Baseboard on a apartment tower corridors, hotel guest rooms, or retail floor edges brief typically runs anywhere from 800 to 6,000 running metres, depending on floor count and ceiling height. The interesting decisions happen at the edges — how you handle the lift lobby, the column-to-ceiling junction, the dropped soffit around lighting tracks. Build that variability into the brief for Custom Baseboard from day one — it is the cheapest place to absorb it.
On the material side, Closed-cell structure is what gives Custom Baseboard its water resistance. Once the cell structure is compromised — either by over-foaming or by aggressive regrind — the product stops behaving like an architectural material and starts behaving like packaging foam. For Custom Baseboard specifically, that means asking the factory for a density data sheet per SKU rather than a generic brochure figure, and where possible cross-checking it with a third-party lab on the first shipment.
For apartment tower corridors, hotel guest rooms, or retail floor edges, Custom Baseboard installs along the floor perimeter. Crews that have moved from timber or plaster usually report a 40–60% reduction in installation time once they adjust their cutting tools and adhesive choice. Talk to two or three installers who have used Custom Baseboard on a comparable project before you commit to a volume order — their feedback on cutting dust, mitre behaviour, and adhesive grab is more reliable than any spec sheet.
When you are ready to brief Custom Baseboard, a sketch and a one-line performance spec will get you a better quote than a 20-page specification document. The factory can always ask follow-up questions; what it cannot do is read your mind.
Frequently Asked Questions
Q: What is a PU skirting board?
A: A PU skirting board (also called a baseboard) is a polyurethane molding installed at the floor-to-wall transition. It protects walls from scuffs and vacuum damage while delivering a clean architectural edge. PU skirting is waterproof, impact-resistant, and far lighter than the equivalent timber profile.
Q: How do you install What hotel fit-out crews wish their custom?
A: Cut What hotel fit-out crews wish their custom with a fine-tooth miter saw. Apply construction adhesive in a continuous bead along the back, press to the wall, and tack with finish nails into studs where possible. Mitre joints at inside and outside corners, fill with spackle, sand, and apply two coats of paint. PU skirting requires no sanding of the face — it arrives primed.
Q: Can PU skirting be used in wet areas?
A: Yes. PU skirting is fully waterproof and ideal for bathrooms, kitchens, and basements. Use a polyurethane adhesive (not water-based) and seal the bottom edge to the floor with a thin bead of clear silicone in wet zones to prevent mop water from wicking under the profile.
Q: What height skirting board should I choose?
A: Standard residential skirting heights are 60–100 mm (2.4–4 inches). For modern interiors, taller profiles (120–150 mm / 5–6 inches) deliver a more contemporary look and visually raise the perceived ceiling height. Heritage and Victorian restorations typically use 150–200 mm (6–8 inches) with a stepped or ogee profile.