Flexible skirting is the same product as flexible baseboard, with a slight difference in profile vocabulary in markets that use the term "skirting" more than "baseboard." The application is identical.
The most common flexible skirting application is a curved wall in a hotel room, a residential feature wall, or a circular feature like a curved shower wall in a luxury bathroom. The base profile is a standard PU skirting profile, the curve is the radius specified by the design, and the factory produces the flexible version to match.
The second most common application is a circular column wrap, where the skirting runs around a circular column at the floor. The radius is the column radius (typically 200 to 400 millimeters), which is a tight curve, and the flexible material is specifically formulated for tight-radius bending. Some factories produce a "coil" flexible skirting for exactly this application.
The third application is a curved island or curved cabinet base in a kitchen or bathroom, where the skirting follows the curve of the cabinet. The radius is typically generous (600 millimeters or more), and the flexible skirting is a standard product.
For sourcing, the right conversation with the factory is about the minimum radius, the profile, and the length of each curved run. The factory needs the radius to determine the right flexible formulation, the profile to match the rigid pieces, and the length to plan production. The lead time is typically two to four weeks, depending on the factory's workload.
A practical note on installation. The flexible skirting wants to spring back to its original shape (typically a coil or a gentle curve), so the install requires more care than rigid skirting. The standard approach is to use a high-tack adhesive, apply it in a continuous bead, and brace the piece every 200 to 300 millimeters while the adhesive sets. A second pair of hands is helpful.
A practical note on the joint between flexible and rigid. The joint is the most visible part of the install, and it has to be cut cleanly. The standard approach is to cut the rigid piece at a slight angle to match the curve's direction, and to cut the flexible piece to land flat against the rigid piece. The joint is then filled with a flexible, paintable caulk that moves with the material.
---
Frequently Asked Questions
Q: What is a PU skirting board?
A: A PU skirting board (also called a baseboard) is a polyurethane molding installed at the floor-to-wall transition. It protects walls from scuffs and vacuum damage while delivering a clean architectural edge. PU skirting is waterproof, impact-resistant, and far lighter than the equivalent timber profile.
Q: How do you install Flexible skirting solutions?
A: Cut Flexible skirting solutions with a fine-tooth miter saw. Apply construction adhesive in a continuous bead along the back, press to the wall, and tack with finish nails into studs where possible. Mitre joints at inside and outside corners, fill with spackle, sand, and apply two coats of paint. PU skirting requires no sanding of the face — it arrives primed.
Q: Can PU skirting be used in wet areas?
A: Yes. PU skirting is fully waterproof and ideal for bathrooms, kitchens, and basements. Use a polyurethane adhesive (not water-based) and seal the bottom edge to the floor with a thin bead of clear silicone in wet zones to prevent mop water from wicking under the profile.
Q: What height skirting board should I choose?
A: Standard residential skirting heights are 60–100 mm (2.4–4 inches). For modern interiors, taller profiles (120–150 mm / 5–6 inches) deliver a more contemporary look and visually raise the perceived ceiling height. Heritage and Victorian restorations typically use 150–200 mm (6–8 inches) with a stepped or ogee profile.