A ceiling ring is the simplest medallion design — a circular ring with a flat or slightly profiled face, applied to the ceiling around a light fixture. The ring is the most affordable medallion option, and the visual effect is significant.
A PU ceiling ring is typically 300 to 800 millimeters in diameter, with a flat face and a small profile on the inner and outer edges. The ring frames the chandelier or pendant, adds a circular line to the ceiling, and gives the fixture an architectural context. The ring is the same material as the other PU trim in the room, with the same finish.
The most common ceiling ring is a simple flat ring — a circular band, 50 to 100 millimeters wide, with a flat face. The ring is the most restrained design, suitable for modern and transitional interiors.
A stepped ring has a small profile on the face — a step, a cove, or a fillet. The ring is more developed than a flat ring, suitable for transitional and traditional interiors.
A decorated ring has a pattern on the face — a fluting, a bead, a Greek key, or a small floral motif. The ring is more ornate, suitable for traditional and formal interiors.
A nested ring has two or three concentric rings, with each ring having its own profile. The nested ring is the most developed, suitable for formal traditional interiors.
For sourcing, ceiling rings are a stock product at most factories. The rings are available in a range of standard sizes (300, 400, 500, 600, 700, 800 millimeters and beyond), with a range of standard designs. The lead time is short because the rings ship from stock, and the price is the most competitive in the medallion category.
A practical install note: the ceiling ring is installed around the existing light fixture, with the fixture's mounting hardware passing through the center of the ring. The ring is glued to the ceiling with construction adhesive and secured with a few screws into the ceiling joist (or with toggle bolts if there's no joist at the ring's center). The wiring is reconnected after the ring is in place, and the painter's topcoat goes on the next day.
A practical sizing note: the ring should be the right size for the fixture and the room. A small chandelier in a large room needs a larger ring (500 to 700 millimeters) to give the fixture presence. A large chandelier in a small room needs a smaller ring (400 to 500 millimeters) so the ring doesn't overwhelm the ceiling. The rule of thumb: the ring's diameter should be approximately twice the fixture's diameter.
---
Frequently Asked Questions
Q: What is a PU ceiling medallion?
A: A PU ceiling medallion is a decorative polyurethane molding that frames a chandelier, ceiling fan, or pendant light. It hides wiring holes and adds architectural depth to flat ceilings. PU medallions weigh roughly 1/4 of equivalent plaster pieces and ship primed and paint-ready.
Q: How do you install Polyurethane ceiling rings?
A: First, isolate power to the light fixture at the breaker. Apply a continuous bead of polyurethane construction adhesive to the back of Polyurethane ceiling rings, lift it into place around the existing fixture, and press firmly against the ceiling. For heavy medallions (≥30 inches), drive two finish nails through the medallion into a ceiling joist. Patch nail heads, spackle the seam, sand smooth, and paint.
Q: What size ceiling medallion should I use?
A: Match medallion diameter to room and fixture size. A 12–18 inch medallion suits standard 8 ft ceilings and small pendants. 20–30 inch medallions anchor chandeliers in dining rooms and entryways. Use an oval medallion (e.g. 20×30 inch) over rectangular tables. The medallion should be roughly twice the diameter of the chandelier canopy.
Q: Are PU ceiling medallions paintable?
A: Yes — every PU medallion we produce arrives with a factory primer that bonds to any interior latex, acrylic, or oil-based paint. Most decorators apply two finish coats. For a metallic or antique look, use a base coat of acrylic latex followed by a glaze and dry-brush highlight.