General PU moulding advice guides
Guides 1–48 of 1,152
- How to Prepare Primed PU Moulding for Paint
Inspect factory-primed PU trim, repair transport marks, test paint compatibility and follow an approved finishing sequence.
- The Ultimate Trim Guide: Everything You Need to Know About PU Moldings
PU moldings are the most versatile, most practical, and most cost-effective trim material available for modern interior design. This ultimate guide covers the full range of PU products, the full range of applications, and the full range of considerations for using PU in any project.
- Decorative Details That Make Custom Interior Trim Work Shine
Custom interior trim work is distinguished from builder-grade trim by the details. The main trim elements (the cornice, the baseboard, the door surround) are similar in both, but the custom work has the small details that add visual richness and classical vocabulary.
- Classic Corner Elements for Traditional Interior Architecture
A classic corner element is a corner block, a plinth block, a rosette, or any other small PU element that's part of the traditional interior vocabulary.
- Ceiling Molding Installation Checklist for First-Time DIYers
A ceiling molding install is a manageable project for a first-time DIYer, with the right preparation, the right tools, and the right technique. The following checklist covers the key steps in a successful install, from the planning to the final paint.
- Architectural Trim Calculator: Estimating PU Molding Quantities
Estimating PU molding quantities is a critical step in any trim project. Under-ordering means delays; over-ordering means wasted material. The right estimation is accurate, with a small allowance for cuts and mistakes, and it gives the buyer the right quantity for the project.
- French Style Molding: How to Achieve Parisian Apartment Chic
French style molding, in the vocabulary of Parisian apartments from the 17th through 19th centuries, is one of the most recognizable interior design traditions in the world.
- PU Ceiling Domes: Installation Guide for Grand Architectural Looks
A PU ceiling dome is one of the most dramatic architectural elements available, and the installation requires careful planning, proper support, and precise execution.
- Pilasters for Doors: Framing Grand Entrances with Classical Style
A pilaster is a flat column-like element applied to the wall on each side of a door, designed to add a substantial vertical element to the entryway. The pilaster is a traditional architectural element, used in formal traditional interiors to add weight and presence to the door.
- Ceiling Molding Installation Checklist for First-Time DIYers
A ceiling molding installation is a manageable project for a first-time DIYer, with the right preparation, the right tools, and the right technique. The following checklist covers the key steps in the install.
- How to Import Polyurethane Trim Products Safely and Cost-Effectively
Importing PU trim products is a common practice for buyers who want factory-direct pricing. The import process involves ordering from a foreign factory, arranging international shipping, clearing customs, and delivering to the final destination.
- Architectural Accents: The Secret to High-End Interior Styling
Architectural accents are the small details that distinguish a high-end interior from a standard interior. The accents are not the main architectural elements (the cornice, the baseboard, the door surround), but the small details that add visual richness and classical vocabulary.
- Wall Medallions: Sculptural Details for Statement Accent Walls
A wall medallion is a larger version of a decorative rosette, designed to be a sculptural focal point on a wall.
- Hallway Wall Trim: Making Passageways Feel Grand and Styled
A hallway is a transitional space, and the right wall trim turns the hallway from a passageway into a designed space. The trim is one of the highest-ROI investments in any home, because a designed hallway makes every room in the home feel more considered.
- Inside a Polyurethane Molding Factory: How High-Density Trims Are Made
A PU molding factory is a manufacturing facility that produces PU moldings from raw materials (polyols, isocyanates, catalysts, blowing agents, additives) using a molding process.
- Architectural Accents: The Secret to High-End Interior Styling
Architectural accents are the small details that distinguish a high-end interior from a builder-grade interior.
- Baseboard Replacement Guide: Swapping Old Wood for PU Skirting
Replacing old wood baseboards with PU baseboards is a common renovation project, and the project can be completed in a day for a single room with basic tools.
- Ceiling Corner Pieces and Rosettes for Sophisticated Room Design
The ceiling corner is the most visible architectural joint in any room with crown molding. Two walls meet the ceiling at a corner, and the crown molding has to handle the transition.
- Retail Store Moldings: Stylish and Durable PU Architectural Trims
Retail store moldings are designed for the specific demands of the retail environment — high visibility, daily customer traffic, constant cleaning, and the need to maintain a consistent, brand-aligned appearance.
- Polyurethane Door Surrounds and Kits for Beautiful Transformations
A PU door surround kit is a complete package — the head casing, the side casings, the corner blocks, the plinth blocks, the optional pediment, and the necessary fasteners and adhesive.
- Painting Polyurethane Trim: Best Primers and Topcoats to Use
Painting PU trim is a straightforward process, but the right primer and the right topcoat make the difference between a finish that lasts for years and a finish that fails within months.
- The Ultimate Trim Guide: Everything You Need to Know About PU Moldings
PU moldings are the most versatile, most practical, and most cost-effective trim material available for modern interior design.
- DIY Wall Paneling Guide: Creating Box Frames with PU Trims
A PU wall paneling layout is one of the most popular DIY projects, because the transformation is significant and the skill level required is moderate. The project can be completed in a weekend with basic tools and a moderate budget, and the result looks like a professional install.
- OEM Polyurethane Molding Services for Custom Architectural Profiles
OEM (Original Equipment Manufacturer) polyurethane molding services are factory services that produce PU molding to a buyer's specification. The buyer provides the design (a drawing, a sample, or a specification), and the factory produces the molding.
- Decorative Details That Make Custom Interior Trim Work Shine
Custom interior trim work is distinguished from builder-grade trim by the details. The main trim elements (the cornice, the baseboard, the door surround) are similar in both, but the custom work has the small details that add visual richness and classical vocabulary.
- Door Casings: Choosing PU Profiles for Clean Frame Transitions
The door casing is the trim that runs around the door opening — the head casing across the top, the side casings down each side. The casing frames the door, covers the gap between the door frame and the wall, and provides the visual transition between the wall and the door.
- Plinth Blocks for Doorways: Architectural Details That Make an Impact
A plinth block is the small block at the base of a door casing, on both sides of the door. The plinth block terminates the baseboard cleanly at the door and provides a visual anchor for the door casing.
- Ornamental Door Trim: Detailing That Defines Luxury Interiors
Ornamental door trim is the small decorative elements applied to the door surround to add classical detail and visual richness. The trim is in addition to the standard casings, and it's the detail that defines the difference between a standard surround and a luxury surround.
- Wall Trim Planning: How to Measure and Layout Panel Moldings
Planning a wall trim layout is the most important part of a wall paneling project, because the layout determines the visual result. The right layout is symmetrical, proportional, and balanced; the wrong layout is awkward, off-center, or visually unbalanced.
- Polyurethane Mantels vs. Wood: Which Fireplace Surround Is Better?
The choice between a PU mantel and a wood mantel comes down to the trade-off between the authenticity of wood and the practical advantages of PU. For most modern applications, PU wins on the practical metrics, and the aesthetic gap depends on whether the mantel is painted or stained.
- Wall Trim Planning: How to Measure and Layout Panel Moldings
Planning a wall panel layout is the most important part of a wall paneling project, because the layout determines the visual result. The right layout is symmetrical, proportional, and balanced. The wrong layout is awkward, off-center, and visually unbalanced.
- Polyurethane Manufacturing Technology: High-Density Foam Evolution
Polyurethane manufacturing technology has evolved significantly over the past 50 years, and the current state of the art is a far cry from the early PU products.
- Corner Medallions and Blocks for Classic Interior Trim Work
A corner medallion is a decorative element applied to the wall or ceiling at a corner, combining the function of a corner block with the visual character of a ceiling medallion. The element handles the corner transition and adds a classical detail at the same time.
- Crown Corner Blocks vs. Mitered Corners: Which Is Easier?
The honest answer is that corner blocks are easier, faster, and more durable than mitered corners. The question is whether the aesthetic works in the room.
- Custom PU Molding: Bringing Unique Architect Visions to Life
Custom PU molding is the right answer for projects where the design calls for a profile that's not in any catalog. The custom profile could be a one-off for a specific project, a modification of a stock profile, or a replication of an existing trim.
- Ornamental Plaques and Wall Accents for Classical Decor
An ornamental plaque is a small to medium PU element with a developed pattern on its face, designed to be applied to a wall as a classical accent. The plaque is similar to a relief carving, but typically smaller and with a less deep relief.
- Model Home Trim Designs: Using PU Moldings to Sell Properties Fast
Model home trim designs are designed for the specific demands of a model home — a high-end presentation that helps sell properties quickly.
- Living Room Molding Ideas: Focal Points with PU Trims and Panels
The living room is the most visible room in any home, and the right molding transforms the room from a functional space into a designed focal point.
- Outside Corner Blocks: Protecting Wall Edges with Style
An outside corner is where two walls meet at an exterior angle — the corner of a room that projects into the space, the corner of a column, the corner of a chimney breast.
- Modern Classic Decor: Integrating PU Trims Into Smart Homes
Modern classic decor is a design approach that blends the restraint of modern design with the warmth of classic details, creating interiors that feel both current and timeless.
- Polyurethane Architectural Elements: The Ultimate Modern Upgrade
Polyurethane architectural elements are a comprehensive upgrade to any interior, providing the visual richness of traditional architectural elements with the practical advantages of modern PU material.
- Decorative Rosettes for Corner Blocks and Furniture Details
A decorative rosette is a small PU element with a circular or square floral pattern, used as an accent in various applications. The rosette is one of the most versatile architectural accents, with applications ranging from corner blocks to furniture details.
- Molding Connectors and Corners: Fast and Clean DIY Trim Solutions
Molding connectors and pre-made corners are the DIY-friendly version of the corner block and the ceiling corner piece. The idea is the same — the factory makes the corner transition, the DIY installer puts the pieces together.
- Architectural Trim Calculator: Estimating PU Molding Quantities
Estimating PU molding quantities is a critical step in any trim project, because under-ordering means delays and over-ordering means wasted material. The right estimation is accurate, with a small allowance for cuts and mistakes.
- Hotel Interior Moldings: Durable PU Trims for Hospitality Design
Hotel interior moldings are designed for the specific demands of the hospitality industry — high traffic, daily cleaning, constant use, and the need to maintain a consistent appearance over years of service.
- Relief Carvings in Polyurethane: Classic Art Meets Modern Material
A relief carving is a decorative element with a three-dimensional pattern carved into its surface, designed to bring the visual richness of classical art to a modern interior.
- Essential Interior Design Components: The Role of PU Moldings
PU moldings are an essential component of interior design, providing the architectural line, the proportion, the detail, and the visual interest that transform a room from a functional space to a designed space.
- Stylistic Corners to Match Baroque, Victorian, and Modern Decor
The corner treatment in a room should match the room's overall design style. A Baroque corner is different from a Victorian corner is different from a Modern corner, and the corner block or ornament should be selected to match the style.